| |
Push Pull Feeders
|
|
Many
application need to feed non-coil materials (bars, strip
lengths, profiles). In this case it is necessary to use
two feeders with synchronised movement:
|
|
 |
the
first one, before the die or the machine, pushes the
material into the die |
|
|
the
second one, after the die or the machine, pulls the
material out of the die |
|
They both work in synchronization, being actuated by a
common cam. It is also possible, by a connection between
the 2 mobile clamps, to achieve a mechanical synchronization.
When the first feeder finishes feeding the material into
the die and the second one takes control of the feed, it
is possible to release air from the first feeder and
enable new material to be inserted. This allows operation
of the press on continuous cycling.
|
|
 |
|
|
|
|
|
