"3 IN 1 NC SERVO STRAIGHTENER FEEDER W/UNCOILER,Electric eye loop control system,cluster gear set maximizes transmission of horsepower,Feed and straightener rolls with a hard chrome plated,www.sukufeeder.com ">

Home

About Us

3 IN 1 NC SERVO STRAIGHTENER FEEDER W/UNCOILER

STANDARD ACCESSORY

1. Electric eye loop control system
2. A cluster gear set maximizes transmission of horsepower
3. Feed and straightener rolls with a hard chrome plated
4. Hold down arm device
5. Feeding line can be easily advance worm gear screw jacks Device
6. Reference indicator adjuster
7. Inverse curve feeding exit direction
8. Coil strip undig support device
9. Outgoing centenary to assist and support the material
10.Coil side guide
11.Transformer
12.PLC Control Feeding program from Mirsubishi

TNCF2 TNCF3 TNCF4

Top

SPECIFICATIONS
Model Item	TNCF3-300	TNCF3-400	TNCF3-500	TNCF3-600	TNCF4-300	TNCF4-400	TNCF4-500	TNCF4-600	TNCF4-700	TNCF4-800
Width of Material (mm)	75-300	75-400	75-500	75-600	75-300	75-400	75-500	75-600	75-700	75-800
Thickness of Material (mm)	0.4-3.2				0.5-4.5
Max coll Weight (kg)	2000		3000		3000			5000
Coil I.D.(mm)	508				508
Max. Coil O.D .(mm)	1200				1200
Max. Speed(mm)	16				16
Feed Pitch Accuracy (mm)	+-0.15				+-0.15
Feed Roll	Upper1/Lower1				Upper1/Lower1
Work Roll	Upper1/Lower1				Upper1/Lower1
Power Supply	220VAC 60HZ				220VAC 60HZ
Air Power Supply	5Kg/cm²				5Kg/cm²
Uncoiler Expansion	Hydraulic				Hydraulic
Servo Motor (kw)	AC3.5				AC2.9		AC4.4		AC7.5
Uncoiler Meter(kw)	1.5Kw		2.2Kw		2.2Kw				3.7Kw

STRAIGHTENING PERFORMANCE

Top

Model/ Width/ Thickness	0.3	1.0	1.3	1.6	2.0	2.3	2.5	2.8	3.2
TNCF1-300	300							250
TNCF1-400	400							300 200
TNCF1-500	500					300	200		150
TNCF1-600	600				300	200	120		100

Model/ Width/ Thickness	0.3	1.0	1.6	2.3	2.5	2.8	3.2	4.5
TNCF2-200	300							150
TNCF2-400	400						300	150
TNCF2-500	500					400	300	150
TNCF2-600	600				500	400	300	150
TNCF2-700	700 600				500	400	300	150
TNCF2-800	800 600				500	400	300	150

TNCF5

STANDARD ACCESSORY

1.. A cluster gear set maximizes transmission ofhorsepower
2. Electric eye loop control system
3. Feed and straightener rolls with a hard chrome plated
4. Outgoing centenary to assist and support the material
5. Motor power hold down arm device
6. Threading tables device (Uncoiler / Straightner)
7. Coil material tip entry support assembly
8. Straightner Opener device
9. Coil side guides
10.Reference indicator adjuster
11.Feeding line easily adjusts by advance worm gear screw jacks device.
12.Transformer
13.Inverse curve Roll-Easy to set up curve ir down curve feeding exit direction.
14.PLC Control Feeding program from Mirsubishi

Top

SPECIFICATIONS
Model Item	TNCF5-400	TNCF5-500	TNCF5-600	TNCF5-700	TNCF5-800	TNCF5-900
Width of Material (mm)	75-300	75-400	75-500	75-600	75-300	75-400
Thickness of Material (mm)	0.6-6.0
Pinch Roll	1Set (Upper Lower)
Feed Roll	1Set (Upper Lower)
Inverse Curve Roll	1Set (Upper)
Straighten Roll	Upper * 4 pcs lower * 3pcs
Speed (m/min)	12
Coil Weights (Kgs)	3000			5000
Coil I.D. (mm)	508
CoilOI.D. (mm)	1200
Uncoil Expansion	Hydraulic Operation
Servo Motor (Kw)	AC5.0 AC7.0
Uncoiler Expansion	AC1.5 AC2.2
Power Supply (kg/cm)	5
Feed Level from floor (mm)	1100-1200

STRAIGHTENING PERFORMANCE

Model/ Width/ Thickness	0.6	1.0	1.3	1.6	2.0	2.3	2.5	3.2 4.0 4.5			5.0	6.0
TNCF5-400	400										350	300
TNCF5-500	500									400	350	300
TNCF5-600	600								500	400	350	300
TNCF5-700	700							600	500	400	350	300
TNCF5-800	800						700	600	500	400	350	300
TNCF5-1000	1000					800	700	600	500	400	350	300

The above figures are for the material having tensile strength 40Kgs/mm/max. Specifications are subject to change for improvement without notice.

Top

TNCF6

STANDARD ACCESSORY

1.. A cluster gear set maximizes transmission ofhorsepower
2. Outgoing centenary to assist and support the material
3. Feed and straightener rolls with a hard chrome finished
4. Feeding line easily adjusts by advance worm gear screw jacks device.
5. Straightner adjusts by advance worm gear screw jacks device.
6. Left / right swing tension roll support device.
7. Reference indicator adjuster
8. Coil material entry support assembly
9. Straightener opener device
10. Hold down arm device
11. Electric Eye loop Control System
12. Transformer
13. PLC Control Feeding from mitusbishi

Save Looping space, Increase SafetyCoiled material is from Uncoiler throughBoth left and right free guide rollers withAdvance photo sensors keeps looping.Through the opener device and bendingRoller system feeding the coiled materialFrom up to down, passing opener device,Coil tip flatness device, pinch rollers, workRollers, feed rollers to make the coiledMaterial passing in an excellent smooth feeding

Top

SPECIFICATIONS
Model Item	TNCF6-400	TNCF6-500	TNCF6-600	TNCF6-700	TNCF6-800	TNCF6-900
Width of Material (mm)	70-400	70-500	70-600	70-700	70-800	70-1000
Thickness of Material (mm)	0.8-8.0
Feed Roll	1Set (Upper / Lower)
Pitch Roller	1Set (Upper / Lower)
Work Roll	Upper * 3 pcs lower * 4pcs
Speed (m/min)	12
Coil Weights (Kgs)	3000			5000
Coil I.D. (mm)	508
CoilOI.D. (mm)	1200			1500
Uncoil Expansion	Hydraulic Operation
Main Motor (Kw)	AC servo/5.0 or7.0
Uncoiler Expansion	AC 1.5			AC 2.2
Power Supply (kg/cm)	5

Model/ Width/ Thickness	0.8	1.4	2.5	3.2	4.0	4.5	5.0	6.0	7.0	7.5	8.0
TNCF6-400	400								300	200	170
TNCF6-500	500							400	300	200	170
TNCF6-600	600						500	400	300	200	170
TNCF6-700	700					600	500	400	300	200	170
TNCF6-800	800				700	600	500	400	300	200	170
TNCF6-1000	1000		900	800	700	600	500	400	300	200	170

Top

The above figures are for the material having tensile strength 40Kgs/mm/max. Specifications are subject to change for improvement without notice.

Website designed, hosted & maintained by Jingle Infosolution Pvt. Ltd.