Zig Zag NC Servo Roll Feeder

zig-zag-roll-feeder

Features

High precision feeding stroke has high precision dimension. The Error of feeding can be controlled within 0.03mm, to meet increasing requirement of processing.

Multi-stage feeding function: You can enter 05 different sets of feeding stroke, each of them could provide 100 times pressing strokes at most by computerized. Compared with common feeding, alternate feeding has the advantages of saving costs and setting storkes flexibly, and is applicable to a variety of arrangement. Flexibility to set feeding stroke: Feed stroke setting without adjusting any mechanical body, only enter the length dimension on the touch-display control panel. Feeding roller: Surface with hardness HRC60, hard chrome plated or sand blast for non-slip, high wear resistance, can hold on machine life, improve quality and production efficiency, reduce costs. The adoption of high rigidity linear slide guide and precision ball screw can improve stability.

Machine Main Specification

Model NCZAF-200, NCZRF-400 NCZAF-400, NCZRF-800 NCZAF-500, NCZRF-1000 NCZAF-600, NCZRF-1200 NCZAF-800, NCZRF-1600 NCZAF-1000, NCZRF-2000 NCZAF-1300, NCZRF-2600 NCZAF-1500, NCZRF-3000
Material width (mm)(Max) 200 400 500 600 800 1000 1300 1500
Material Thickness (mm)(Max) - NCZAF 1.5×200 3.2×100 1.5×400 3.2×200 1.5×500 3.2×250 1.5×600 3.2×300 1.5×800 3.2×400 1.5×1000 3.2×500 1.5×1300 3.2×650 1.5×1500 3.2×750
Material Thickness (mm)(Max) - NCZRF 2.0×200 3.2×100 2.0×400 3.2×200 2.0×500 3.2×300 2.0×600 3.2×400 2.0×800 3.2×500 2.0×1000 3.2×600 2.0×1300 3.2×800 2.0×1500 3.2×900
Offset width (mm)(Max) - NCZAF 200 400 500 600 800 1000 1300 1500
Feed Length (mm)(Max) - NCZRF 200 400 500 600 800 800 800 800
Feed Length (mm)(Max) 9999.99
Feed Speed (mm)(Max) - NCZAF 15
Feed Speed (mm)(Max) - NCZRF 30
Power Supply 415V 3phase
Release Equipment Pneumatic